+86-15165069582

Automatic dog food machine equipment production line

Mar 23, 2020

Jinan Datong company's automatic dog food machine equipment production line is a small-scale production line project specializing in the production and processing of pet dog food and cat food. Suitable for small and medium pet food processing plants.

Small entrepreneurs initially only had the idea of producing pet food for dogs and cats. They have been engaged in related work before: they have dogs, have their own pet shops, or are familiar with many related friends. I think this profit is okay. I want to produce dog food . This is a customer situation, mainly considering that sales are not a problem, and you have a fixed or potential sales market. There is another type of customer, which is convenient to purchase raw materials. There is a slaughterhouse with cows, sheep and pigs nearby, which can get fresh slaughtering materials into the water. Or the purchase price of the grain is low, and the processing is convenient and the cost is low. Even if the dog food produced is lower than the market price of general products, the profit is objective. These are two cases of entrepreneurial planners in the production of pet food for dogs and cats.

There is also a case of small dog food processing plants purchasing machinery: increasing scale and output. The small equipment purchased in the early stage can no longer guarantee its own order shipment and production and sales needs. It is urgent to increase the machine to expand the output or the previous equipment production is too complicated, and it is necessary to directly replace the entire set of dog food equipment.

This dog food machine equipment production line uses powder as raw material: corn flour, flour and other cereal starch ingredients, supplemented by meat, protein, grass, fat powder, and various seasonings And raw materials with extended shelf life. It is not necessary to ripen the raw materials in advance, as long as it is ground into powder, the fineness of the raw materials can be greater than 60 mesh.

dog food machine equipment

Jinan Datong Dog Food Cat Food Machine Equipment Production Line Introduction:

1. Raw material crushing: Raw materials are mainly divided into two categories, starch and fat. Starch is mainly various grains. Its crushing can be achieved by ordinary grinder. Only the fineness and raw materials in the crushing process need to be clean. Just clean. Fat raw materials are mainly bones and meat. Large bones are crushed in two steps. First, use a bone breaker to crush large bones into small particles, and then use a colloid mill to crush them into sub-packages or mud. Meat only needs to use colloids. Grind into mashed meat or powder, add to the grain powder and stir well.

2. Stirring of raw materials: two functions of mixing equipment, one is to stir all kinds of raw materials evenly, and the other is to adjust the moisture and humidity. Our Datong company generally configures a vertical fast mixer, which has the advantages of short mixing time, fast completion of uniform mixing, and use in the machine before the raw material humidity does not change significantly, ensuring uniformity and quality of dog food particles. The disadvantage is that the single-cylinder stirring capacity is small, and it needs to be constantly stirred during the production process.

3. Raw material extrusion and maturation molding: Under the condition of high temperature and high pressure, the twin-screw extruder is extruded and extruded. By changing different molds, different styles and shapes of dog food and cat food particles are produced. For different raw material proportions and humidity, different zone temperatures and screw speeds as well as the feeding speed of the feeder need to be adjusted to ensure that the produced dog food particles are of high quality and sell well.

4. Drying of dog food granules: The dog food is walking on a stainless steel mesh belt, feeding from one end of the oven, and discharging from the other end. During this conveying process, the electric heating tube resists the heating temperature to dry the granules and hydrate them The role is: first, to extend the shelf life, and second, to enhance the adsorption performance of the particles, to facilitate the fuel injection seasoning process behind.

5. Dog food granule surface spraying: The surface of dog food granules is sprayed with oil and seasoning to enhance the taste and appearance, and at the same time it also plays a part in cooling down the dog food granules.

6. Cooling and cooling of pet dog food particles: It is not enough to just cool down during the surface spraying process, so you must use a special air-cooled cooling device to reduce the temperature of the dog food particles to about normal temperature to ensure that they will not return to moisture after packaging. Deterioration, unable to save, affecting sales.

7. Packaging: There are many options for the packaging of dog food. If the output is not large and the packaging is generally more than 20 kg, it is recommended to use a manual sewing machine to manually package it. If the production is guaranteed, it is recommended to use a single layer or Double-layered semi-automatic feed packaging machine, if you need to pack small tens of grams of bags, do samples or boutique sales, you need to use fully automatic standard weighing packaging machine.


Jinan Datong Company's supporting work for customer procurement needs:

1. Preliminary plant planning and design: If the customer does not have a factory yet, our Datong company can help the customer to advise the customer on the height of the plant area according to the size and placement rules of our machinery and equipment; if the customer already has his own factory building, my Datong The company can make detailed machine placement planning drawings and power connection recommendations for customers based on the area and height of their buildings.

2. Machine production and delivery: complete the production of machinery and equipment within a specified time, and arrange logistics and delivery to your door.

3. After-sales service: If there is a problem in the production process of the dog food machinery and equipment, you can contact us at any time, and we will be responsible for solving it.

4. Long-term cooperation planning: In the normal production process of the customer in the later period, if there is a new product launch or a business expansion opportunity for the customer's existing machine, our Datong company will contact the customer to seek a long-term stable and win-win cooperation.


Nosūtīt pieprasījumu